Battery Replacement; Doors - Jeep 2007 Wrangler Owner's Manual

Battery Replacement

The recommended replacement battery is CR2032.
1. If the key fob is equipped with a screw, remove the
screw. With the transmitter buttons facing down, use a
flat blade (screw driver) to pry the two halves of the
transmitter apart. Use extreme care not to damage the
seal or internal components.
Separating Transmitter Halves
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25
2. Remove and replace the batteries. Avoid touching the
new batteries with your fingers. Skin oils may cause
battery deterioration. If you touch a battery, clean it with
rubbing alcohol.
3. To assemble the transmitter case, snap the two halves
together.
NOTE: If the key fob is equipped with a screw, reinstall
and tighten the screw until snug.

DOORS

The vacuum fluorescent (VF) display located in the
odometer area displays the word "door" as an indication
of a door ajar or door not completely closed. When the
vehicle is not moving and the door is ajar or not
completely closed, the VF display will show the word
"door."
If any other active warnings including "GATE", "GAS-
CAP", "NOFUSE", or "ESPOFF" are present, they will be
2