Spare Tire Stowage; Preparations For Jacking - Jeep 2007 Wrangler Owner's Manual

Hide thumbs Also See for 2007 Wrangler:
Table of Contents

Advertisement

Spare Tire Stowage

To remove the spare tire from the carrier, remove the tire
cover, if equipped, and remove the lug nuts with the lug
wrench turning them counterclockwise.
NOTE: If you have added aftermarket accessories to the
spare tire mounted carrier, it cannot exceed a gross
weight of 50 lbs (23 kg) including the weight of the spare
tire.

Preparations For Jacking

Park on a firm level surface, avoid ice or slippery areas,
set the parking brake and place automatic transmission
in P (Park), or manual transmission in R (Reverse). Turn
OFF the ignition.
WHAT TO DO IN EMERGENCIES 339
WARNING!
Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off
the road to avoid being hit when operating the jack
or changing the wheel.
• Turn on the Hazard Warning Flasher.
• Block both the front and rear
of the wheel diagonally oppo-
site of the jacking position.
For example, if changing the
right front tire, block the left
rear wheel.
• Passengers should not remain in the vehicle when the
vehicle is being jacked.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

2007 jk wrangler

Table of Contents