Advertisement
10
DIMENSIONS
（Units：mm）
ASW-SG85F
ASW-SG85F-Y05
ASW-SG86F
ASW-SG86F-Y05
1.8
4
optical axis
center position
1Ch
1Ch
11
WARRANTY
Takenaka Electronic Industrial Co., Ltd. (Takenaka) guarantees the quality of the product described in this manual, based on Takenaka Quality
Standard. Please contact the agent or sales office where you bought the product if you find any defects.
1《Warranty period》
The warranty period of this product is one year after the invoice date. This warranty does not apply to consumable parts such as batteries or
relays. Regarding a product of another manufacturer sold by Takenaka, the warranty conforms to the quality standard of the manufacturer.
2《Scope of warranty》
If any defect is found during the warranty period, Takenaka will repair or replace the product without charge.
The following cases are not covered by the warranty even within the warranty period. Please note that the warranty period is not extended after
a repair or replacement.
① If the product is used inappropriately or used under inappropriate conditions that are not described in the instruction manual or specifications.
② If the defect is caused by improper maintenance, including a failure to replace consumable or periodical parts as described in the instruction
manual or specifications.
③ If the defect is not directly caused by the warrantied product.
④ If the product is modified or repaired by persons not authorized by Takenaka.
⑤ If the defect is caused by rough handling, dropping, or collision after the product is delivered.
⑥ If the defect could not be predicted from a technical viewpoint at the time Takenaka made the agreement for, manufactured, or installed the product.
⑦ If the defect is caused by a natural disaster such as a fire, flood, earthquake, lightning (including a lightning surge) and so on, or an accident
such as an abnormal voltage that Takenaka is not responsible for.
The warranty provided here is only for the Takenaka product and does not cover any secondary damage caused by problems related to the product.
3《Target of Warranty》
(1) When combining the Takenaka product with a product made by another manufacturer, confirm any related laws, rules, regulations, standards,
and so on. It is the customerʼs responsibility to confirm the suitability of the product for the system or device it is to be combined with.
(2) This product is designed and manufactured for industrial use. This warranty does not cover the application of the product to:
(1) Equipment for nuclear facilities including nuclear power stations or nuclear control facilities, incineration systems, railway vehicles, aircraft or
automobiles and their related facilities, medical equipment, entertainment equipment, safety devices, equipment regulated by administrative
bodies or specific industries.
(2) Equipment that may create serious danger or adversely affect human life or property.
(3) Public utilities for electricity, town gas or water supply, or equipment that requires consistent reliability, such as 24-hour continuous operation.
(4) Usage outdoors or usage in conditions or environments that are not prescribed in the instruction manuals.
(5) Usage or equipment that requires considerable care or attention to safety, similar to the cases in ① to ③.
This warranty may cover these applications if Takenaka is notified about the application of the product before sale and the customer approves
the compatibility and the specification of the product by written agreement and/or by providing the required safety measures.
12
DISCLAIMER
This product is designed for industrial applications to detect the presence, absence, or passage of a variety of objects. It has no functions to
●
prevent disasters, accidents, death or injuries. Takenaka will assume no responsibility for damages or losses resulting from accidents or disasters
caused by a failure of the product, incomplete wiring or installation, or any act that does not follow the instruction manual.
We will assume no responsibility for damages or losses caused by:
Earthquakes, lightning (including lightning surges), fires that we are not responsible for, acts or incidents caused by third parties, intentional or
●
accidental misuse, or usage under other abnormal conditions.
Any secondary damage caused by the usage, faulty operation, or malfunction of the product like suspended operation or malfunction of a
●
connected device or system, damage to a device, loss of profit, interruption of business, corruption or loss of memory contents, cost of
restoration, etc.
Misuse, failure related to maintenance, installation or deinstallation, or failure to follow the contents of the instruction manual.
●
Any malfunction (including false alarm or lost alarm) caused by the combination with a connected device or software over that we have no control.
●
The responsibility of Takenaka is limited to the extent of repair or replacement of the product. The expenses we are liable for will not exceed the
original product cost.
4/4
形式
P(Pitch)
N(Channel)
ASW-SG85F
25
ASW-SG85F-Y05
6.35
ASW-SG86F
26
ASW-SG86F-Y05
[The dimensions shown in these drawings apply to the bottom end(※2), not the protrusion
end(※1)of the combs]
P(Pitch)×N(Channel)=L2
P(Pitch)×N(Channel)=L2
P
※1
A
※2
2-M4TAP×8
W(Width)
L1
L2
L3
168.65
160.55
158.75
4.55
166.9
165.1
175
L1
W
0.35
A,B
(common to each)
60
L3
0.4
1
0.4
2
4
1(optical axis width)
optical axis
center position
(23°)
※tail of the protrusion end of the comb
10
1.8
3(optical axis width)
2
optical axis
20
25
center position
sensor unit
50
B
(10)
Ø6
cable
14
ABH - HS - 0151 （ ʼ 14−3） - TY
Advertisement
