Important Information; Document Information; Safety Information - Nibe VVM 500 Service Manual

1 Important information

Document information

This technical manual is a complement to the Installer
handbook for VVM 500, containing:
Component description.
Information to facilitate fault-tracing.
Instructions for replacing components.
Wiring diagram.
Supplementary technical information.
The document applies to VVM500 with software ver-
sions up to and including week 3204.
The heat pump software version can be found in the
info menu (menu 3.1).

Safety information

This manual describes installation and service proced-
ures for implementation by specialists.
This appliance can be used by children
aged from 8 years and above and per-
sons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Chil-
dren shall not play with the appliance.
Cleaning and user maintenance shall
not be made by children without super-
vision.
Rights to make any design or technical
modifications are reserved.
©NIBE 2014.
Symbols
NOTE
This symbol indicates danger to machine or
person.
Caution
This symbol indicates important information
about what you should observe when main-
taining your installation.
TIP
This symbol indicates tips on how to facilitate
using the product.
2 Chapter 1 | Important information
Marking
The CE marking means that NIBE ensures that the
product meets all regulations that are placed on it
based on relevant EU directives. The CE mark is obligat-
ory for most products sold in the EU, regardless where
they are made.
Serial number
The serial number can be found at the bottom right of
the front cover and in the info menu (menu 3.1).
Caution
Always give the product's serial number (14
digits) when reporting a fault.
NIBE™ VVM 500