Initial Refrigerant Charge; Adjustment Of Instruments And Safety Devices; Control Devices; Pressure Settings - GEA Grasso 5 Installation And Maintenance Instructions Manual

INSTALLATION AND PREPARATION FOR USE
PREPARATIONS FOR USE
Fig.11:
1.4.4

Initial refrigerant charge

Refrigerant charging should be done in accordance with the plant manual by
qualified refrigeration engineers.
1.4.5

Adjustment of instruments and safety devices

1.4.5.1 CONTROL DEVICES

1.4.5.2 PRESSURE SETTINGS

Suction pressure *
Discharge pressure
1
26
Pre-lubrication valve (P), Oil control pressure regulator (B)
Caution!
Pre-lubrication just before the first start is obligatory.
Hint!
Refer to separate user manuals, in case an electrionic control device
is installed.
Setting
1
Min.
Suction and
intermediate Setting
pressure
Setting
Page 26
Max.
Settings Pdischarge - Psuction must never exceed max. value as mentioned in Product Information
Pressure safety limit switches
o
5 C below design evaporating temp.
0.3 bar(a)
Max.= refer to Product Information (PI)
o
5 C above design condensing temp.
26 bar(a)
Grasso V 300(T)
Grasso V 450(T)
Grasso V 600(T)
0089288_imm_v_english_19
07.04.2021