Hoisting And Moving Instructions - GEA Grasso 5 Installation And Maintenance Instructions Manual

1.3.3

Hoisting and moving instructions

Fig.2:
Packaged base frame:
The only places that can be used for safe hoisting of the package are the four
hoisting eyes on the steel base frame as shown in the above figure. Prior to
hoisting a compressor package with a V-belt drive arrangement, the factory
mounted drive guard has to be removed. Attach spreader bars to the slings so as
to prevent damage to piping and components.
Bare compressor or loose components:
Determine the dead weight of the particular component (see "Product Information
(ED)"), prior to moving a bare compressor or loose component. Use the hoisting
eyes only, DO NOT sling from other compressor parts (see Figure 3, Page 16).
0089288_imm_v_english_19
07.04.2021
Hoisting a compressor package
Warning!
DO NOT use the compressor or motor or oil separator hoisting eyes to
move the package! These hoisting eyes are intended for lifting loose
components only and not for the entire package!
INSTALLATION AND PREPARATION FOR USE
INSTALLATION
15