Parent Unit Screen Icons - Angelcare AC127 Owner's Manual

PARENT UNIT SCREEN ICONS

Temperature display
1
Temperature alerts
2
Detection mode indicators
3
Visual sound indicator
4
Reception quality indicator
5
Parent Unit battery level indicator
6
VOX mode indicator
7
Celsius or Fahrenheit display
8
MONITOR'S FUNCTIONS
Note:
• The settings are accessed by pressing and holding the MENU button
the Parent Unit
• The MENU functions are in a loop. Each time you press the OK button briefly you
move on to the next menu function
Activate/Deactivate movement detection
The Sensor Pad will alarm if there is no movement after 20 seconds. If after 20 seconds
there is NO movement detected, both the Parent and Nursery Units speakers will emit loud
consecutive beeps - this is the movement alarm
When your baby gets older, allows you to turn movement detection OFF and use your monitor
for sound only
Activate/Deactivate TIC function
If movement detection is activated, allows you to hear a Tic sound every 5 seconds
Activate/Deactivate sound (nursery transmission)
Allows you to use your monitor for movement detection only
Set VOX function
Sound Activated (VOX ON): Means that it will transmit sounds only when it detects them,
based on the setting of the sensitivity level. To save power, after 10 seconds, the sound
transmission will stop if no sound is detected. Once sound is detected transmission will
automatically activate
Continuous Sound (VOX OFF): Means the sound monitoring is continuously ON, picking up
all sounds
Set VOX sensitivity (if VOX is activated)
The sensitivity of the microphone is adjustable (4 levels). This means that sound will only
transmit based on the level that you set
Set Celsius or Fahrenheit display
Activate/Deactivate temperature alarm
Alerts when the temperature reaches the maximum or minimum set temperature
Set colder temperature alarm (if temperature alarm is activated)
Set warmer temperature alarm (if temperature alarm is activated)
1
2
3
4
E
N
8
7
6
5
on
9