4-6
PC-HEALTH Install MyGuard Hardware Monitor Utility
1. Click PC-health when MAGIC INSTALL
MENU appears
3. Click Install to begin the installation.
The above driver screen and operation steps are for reference only because
NOTICE!
we might update the drivers or make modifications due to technological
need and user's benefits. We reserve these changes or upgrade without
advanced notification. Please visit our website for possible driver upgrade.
4-7 How to Update BIOS
STEP 1. Prepare a bootable floppy disk. (You may make one by click START click RUN
type SYS A:
STEP 2. Download upgrade tools and the latest BIOS files of the motherboard from official
website and then make a copy of it to your bootable floppy disk after
decompressing these files
STEP 3. Insert the disk into A: ,start your computer and then type in
"A:\xxxxxx.BAT"(xxxxxxx being the file name of the latest BIOS )
STEP 4. Type Enter to update and flash the BIOS. The system will restart automatically
when BIOS is upgraded.
4-8
AMD Platform RAID Function Installation
Please set these choice in the BIOS as RAID:BIOS setup \Integrated Peripherals \Onchip
SATA Device \ Onchip SATA Type. When the below figures appeared, please press [Ctrl-F]
into figure 2
click OK)
38
2. Click Next on My Guard Install Shield Wizard
Window
4. Click Finish to complete the installation.