Table of Contents
Advertisement
Valid Memory Configuration for DDR III
Bank
DDRIII1
DDRIII 2
Total
NOTICE!
1.
Dual channel function only supports when 2 DIMM Modules plug in either both DDR III 1 &
DDR III 2 or DDRII 1 &DDRII 2.
2.
Memory modules in DDR III 1 & DDR III 2 or DDRII 1 &DDRII 2 must be of the same type,
same size, and same frequency for dual channel function.
3.
DDRII 1and DDR II 2 is for installing DDR II memory modules only while DDRIII1 and
DDRIII 2 is for installing DDRIII memory modules only.
4.
User can only install DDRII memory module(s) in DDR II memory module slot(s) when an
AM2 or AM2+ CPU is installed;
5.
User can choose either installing DDRII memory module(s) in DDR II memory module slot(s)
or DDRIII memory module(s) in DDR III memory module slot(s), but NEVER both DDRII
and DDRIII memory module(s) at the same time under any circumstances.
Install DDR SDRAM modules to your motherboard is not difficult, you can refer to figure
below to see how to install a 240-Pin DDR II 667/DDR II 800/DDR II 1066 or a DDR III
1066
/DDR III 1333
When you install DIMM module fully into the DIMM socket the eject tab should be locked
NOTICE!
into the DIMM module very firmly and fit into its indention on both sides.
240-Pin DIMM
DDRIII1333/DDRIII 1066/DDRIII800
DDRIII1333/DDRIII 1066/DDRIII800
System Memory (Max 2 GB)
SDRAM module.
DDRIII1 & DDRIII2: Dual Channel 1
DDRII1 & DDRII2: Dual Channel2
PCS Maximum Capacity
10
X1
2GB
X1
2GB
2
4GB
Advertisement
Table of Contents
