Taillamps, Turn Signal, And Stoplamps; Replacement Bulbs - Chevrolet 2010 Corvette Owner's Manual

Taillamps, Turn Signal, and
Stoplamps
To replace a stoplamp, taillamp/turn signal bulb:
1. Remove the screw from the top of the lamp assembly.
2. Tilt the lamp assembly toward you.
3. Turn the bulb socket one-quarter turn
counterclockwise and pull it out.
4. Pull the bulb straight out to remove it from the
socket.
5. Push the new bulb in the bulb socket until it snaps
into place.
6. Reinstall the lamp assembly by first lining up the
tabs on the bottom of the lamp assembly with the
tabs in the vehicle, then slide it in.
7. Replace the screw at the top of the lamp assembly.

Replacement Bulbs

Exterior Lamp
Front Parking/Turn
Signal/Daytime Running
Lamp (DRL)
Headlamp, High-Beam Lamp
Sidemarker Lamp
Stoplamp/Taillamp/Turn
Signal Lamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
5702KA
H9
W3W
3057KX
6-61