Taillamps, Turn Signal, Stoplamps, And Back-Up Lamps; License Plate Lamp - Chevrolet Spark 2021 Owner's Manual

184 Vehicle Care
3. Remove the cover from the back of the
headlamp assembly by turning it
counterclockwise.
4. Disconnect the electrical connector.
5. Remove the bulb from the lamp
assembly by turning counterclockwise.
6. Replace the bulb and reverse Steps 1 5
to reinstall.
Taillamps, Turn Signal, Stoplamps,
and Back-Up Lamps
1. Stoplamp/Taillamp
2. Turn Signal Lamp/Taillamp
3. Back-up Lamp
To replace a taillamp, turn signal lamp,
stoplamp, or back-up bulb:
1. Open the liftgate. See Liftgate 0 17.
2. Remove the two screws and the lamp
assembly.
3. Turn the bulb socket counterclockwise
and remove the socket.
4. Press the bulb in and turn
counterclockwise to remove it from the
socket.
5. Press the new bulb in and turn clockwise
to install the bulb into the socket.
6. Turn the bulb socket clockwise to
reinstall.
7. Reinstall the lamp assembly and two
screws.

License Plate Lamp

1. Attachment Screws
2. License Plate Bulb
3. Bulb Socket
To replace a license plate lamp bulb:
1. Remove the two screws (1) from the
license plate lamp assembly.
2. Turn and pull the license plate lamp
assembly down.
3. Turn the bulb socket (3) counterclockwise
and pull it out of the lamp assembly.