Electrical System; Add-On Electrical Equipment; Headlamp Wiring; Windshield Wiper Fuses - Chevrolet 2010 Corvette Owner's Manual

Hide thumbs Also See for 2010 Corvette:
Table of Contents

Advertisement

Electrical System

Add-On Electrical Equipment

Notice: Do not add anything electrical to the
vehicle unless you check with your dealer/retailer
first. Some electrical equipment can damage
the vehicle and the damage would not be covered
by the vehicle's warranty. Some add-on electrical
equipment can keep other components from
working as they should.
Add-on equipment can drain the vehicle battery, even if
the vehicle is not operating.
The vehicle has an airbag system. Before attempting to
add anything electrical to the vehicle, see Servicing
Your Airbag-Equipped Vehicle on page 2-58 and Adding
Equipment to Your Airbag-Equipped Vehicle on
page 2-58.
6-102

Headlamp Wiring

The headlamp wiring is protected by fuses in the fuse
block. An electrical overload will cause the lamps to turn
off. If this happens, have the headlamp wiring checked
right away.

Windshield Wiper Fuses

The windshield wiper motor is protected by a circuit
breaker and a fuse. If the motor overheats due to heavy
snow, etc., the wiper will stop until the motor cools.
If the overload is caused by some electrical problem,
have it fixed.
Power Windows and Other Power
Options
Circuit breakers protect the power seats, power
windows, and other power accessories. When the
current load is too heavy, the circuit breaker opens and
closes, protecting the circuit until the problem is fixed
or goes away.

Advertisement

Table of Contents
loading

Table of Contents