Chevrolet 2010 Corvette Owner's Manual page 75

6. To tighten the belt, push down on the child restraint,
pull the shoulder portion of the belt to tighten the
lap portion of the belt and feed the shoulder belt
back into the retractor. When installing a
forward-facing child restraint, you may find it
helpful to use your knee to push down on the
child restraint as you tighten the belt.
7. If the child restraint has a top tether, follow the
child restraint manufacturer's instructions regarding
the use of the top tether. See Lower Anchors
and Tethers for Children (LATCH) (Coupe and
Convertible Models Only) on page 2-35 or Lower
Anchors and Tethers for Children (LATCH)
(Z06 and ZR1 Models Only) on page 2-36 for
more information.
8. Push and pull the child restraint in different
directions to be sure it is secure.
If the airbag or airbags are off, the off indicator in the
passenger airbag status indicator will come on and
stay on when the vehicle is started.
If a child restraint has been installed and the on
indicator is lit, see "If the On Indicator is Lit for a Child
Restraint " under Passenger Sensing System on
page 2-52 for more information.
To remove the child restraint, unbuckle the vehicle
safety belt and let it return to the stowed position.
2-43