Advertisement
Quick Links
iiNet BizPhone 'Standard' T43U Quick Startup Guide
IP PHONE T43U
Quick Startup Guide
P a g e |
1 of 2
Confidential
Packaging Contents
The following contents are included in your T43U package:
Assembling the Phone
1. Attach the stand, as shown below.
2. Connect the handset and optional headset, as shown below.
Note: Headsets are to be purchased separately.
3. Connect the USB flash drive (if required), as shown below.
Note: The USB ports can also be used to connect other
USB devices, such as EXP43, USB headset and so on. We
recommend you connect Bluetooth USB dongle or Wi-Fi
USB dongle (purchased separately) to the upper USB
port, and connect EXP43 (purchased separately) to the
lower USB port.
4. Connect the network and power, as shown below.
Note: You have two Power Options – AC or PoE. If PoE is
provided, you do not need to connect to the Power Adapter.
Startup the Phone
After the IP Phone is connected
to the network and supplied with
power, it automatically begins
the initialisation process.
After startup, the phone is ready
to use (pre-configured).
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Yealink T43U
Summary of Contents for Yealink T43U
- Page 1 BizPhone ‘Standard’ T43U Quick Startup Guide Packaging Contents 4. Connect the network and power, as shown below. The following contents are included in your T43U package: IP PHONE T43U Quick Startup Guide Assembling the Phone 1. Attach the stand, as shown below.
- Page 2 HANDSET SETTINGS BASIC CALL FEATURES Add a Contact Placing Calls Call Hold • Press the Directory soft key when the phone is idle, and then Using the Handset: Press the Hold soft key during an active call. Pick up the handset, enter the number and press the Send soft select the desired group.
Need help?
Do you have a question about the T43U and is the answer not in the manual?
Questions and answers