Answering A Call; Ending A Call; Redial; Call Mute And Un-Mute - Yealink SIP-T52S Quick Start Manual

ANSWERING A CALL

Using the handset:
Pick up the handset.
Using the speakerphone:
Press .
Using the headset:
Press .
Note:
• You can reject an incoming call by pressing the Reject soft key.

ENDING A CALL

Using the handset:
Hang up the handset or press the
Using the speakerphone:
EndCall
Press or the
Using the headset:
Press the EndCall soft key.

REDIAL

• Press to enter the
Send
or the soft key.
• Press twice when the phone is idle to dial out the last dialed number.

CALL MUTE AND UN-MUTE

• Press to mute the microphone during a call.
• Press again to un-mute the call.

CALL HOLD AND RESUME

To place a call on hold:
Hold
Press the soft key during an active call.
To resume the call, do one of the following:
• If there is only one call on hold, press the
• If there is more than one call on hold, press
and then press the Resume

CALL TRANSFER

You can transfer a call in the following ways:
Blind Transfer
1. Press the Tran soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to.
Tran
3. Press the soft key.
Semi-Attended Transfer
1. Press the Tran soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
EndCall soft key.
soft key.
Placed Calls
list, press
Resume soft key.
or
soft key.
Media IP Phone – SIP-T52S
or to select the desired entry, and then press
to select the desired call,
.
8
Quick Start Guide