Table of Contents
Advertisement
on 25% increment.
Press
100%.
6.2 Auto Ramping the Output
Automatic ramping gives you the ability to continuously apply a varying stimulus from
the calibrator to a transmitter, while your hands remain free to test the response of the
transmitter.
When you press
0 % ramp in your choice of three ramp waveforms:
0%-100%-0%
0%-100%-0%
0%-100%-0%
step.
Exit the slop output function, please press any key.
6.3 Factory Reset
Factory reset consists of the following items:
The working status recovers to the voltage measurement.
Automatic shutdown time is reset to be 30 min, which is effective.
LCD backlight brightness is set to be 60%.
Output span is recovered to be factory default.
Start the calibrator and press
default will enter working mode when the recovery is completed.
or
instantly to make output jump within the span of 0% to
, the calibrator produces a continuously repeating 0 % - 100 % -
40-second smooth ramp
15-second smooth ramp
Stair-step ramp in 25 % steps, pausing 5 seconds at each
until the buzzer works, and the recovery of factory
14
Advertisement
Table of Contents
