Herutu TW-800R-EXL Manual
  1. Manuals
  2. Brands
  3. Herutu Manuals
  4. Receiver
  5. TW-800R-EXL
  6. Manual

Herutu TW-800R-EXL Manual

Wireless communication
Hide thumbs
Table of Contents

Advertisement

Quick Links

Please use this operation manual correctly on reading well. Please keep it carefully to be able to read
immediately, when required.
TW-800R-EXL

Table of Contents

■General outline ..........................................................1
■Main part and accessories ........................................2
■Safety concerns ........................................................4
■Specification ..............................................................5
■Network communication ...........................................6
■Name and function of each part ............................. 11
■Setting .....................................................................12
■How to use ..............................................................15
■Note on use .............................................................19
■Dimensional drawing ..............................................20
■After service and Warranty .....................................21
Wireless Communication
Manual V1.31

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TW-800R-EXL and is the answer not in the manual?

Questions and answers

Related Manuals for Herutu TW-800R-EXL

Summary of Contents for Herutu TW-800R-EXL

  • Page 1: Table Of Contents

    Wireless Communication TW-800R-EXL Manual V1.31 Please use this operation manual correctly on reading well. Please keep it carefully to be able to read immediately, when required. Table of Contents ■General outline ............1 ■Main part and accessories ........2 ■Safety concerns ............4 ■Specification ..............5...

  • Page 3: General Outline

    "TW-800R-EXL" is a receiver with LAN connection specification of TW-800 series. "TW-800R-EXL" has XPort of Lantronics Corporation as a conversion module for LAN connection. For XPort, if you would like to check the details that can’t be explained in this manual or more details, please refer to the XPort manual published by Lantronics.

  • Page 4: Main Part And Accessories

    TW-800R-EXL ■Main part and accessories Receiver TW-800R-EXL TW-800R-EXL ×1 (Dipole antenna for ANT2 is set at shipment) *ANT2 is fixed by resin before shipment by regulation of FCC/IC in an applicable country. Option ・AC Adapter ADB24050-C (With connecting cable 1.8m) Cable approx.
  • Page 5 TW-800R-EXL ・External antenna MB-13F (With magnet base/Coaxial cable approx. 1.5m) Antenna approx. 22.5cm Coaxial cable approx. 1.5m *ANT2 is fixed by resin before shipment by regulation of FCC/IC in an applicable country.

  • Page 6: Safety Concerns

    TW-800R-EXL ■Safety concerns Safety concerns (Be sure to read) To prevent human injury of user or damage in property from occurring, be sure to observe the precautions shown below. ■ The degree in safety hazard and damage generated by the wrong usage while ignoring the descriptions is classified by the following displays.

  • Page 7: Specification

    2,403MHz-2,478MHz Channel 76CH Modulation way GFSK Communication way Simplex Power of antenna 2.1mW ●Receiver TW-800R-EXL Items Specification RJ-45 Ethernet * 1 Interface 10BASE-T or 100BASE-TX (Auto sense determination) Contact output * 1point (Terminal block:M3(2P)) Contact mechanism MOS-FET/1a Output Rated load voltage AC/DC30V per point Rated load current 0.5A per point...

  • Page 8: Network Communication

    TW-800R-EXL ■Network communication In order to connect the receiver to the network, you first need to set the network settings according to the network environment. For details of the setting method, refer to the attached "LAN Setting Manual for TW-800R-EXL".
  • Page 9 TW-800R-EXL LED monitor Activity LED Link LED No Activity No Activity Amber Half duplex Amber 10Mbps Green Full duplex Green 100Mbps...
  • Page 10 TW-800R-EXL ●Communication Specification Ethernet Interface (According to XPort specification) Interface RJ-45 Ethernet 10BASE-T or 100BASE-TX（Auto sense determination） Compatibility Ethernet Version 2.0/IEEE802.3 Protocol TCP/IP, UDP/IP Ethernet output data types are classified into two types: “Short data” and “Long data”. Set the data type with DIP switch of the receiver. For details, refer to the setting of receiver in "Setting".
  • Page 11 TW-800R-EXL Formatting long data (43byte) Data Fastening varied information, according Transmitter Maintenance Transmitter Preamble STX ETX Checksum test switch to the type Data Data ID number battery information transmitter used Data name Description Byte Preamble FFH,FFH,FFH ID number 10 digit is converted to ASCII data(Hexadecimal).
  • Page 12 TW-800R-EXL Communication specification between the receiver CPU and XPort RS-232C communication is carried out between the receiver CPU and XPort. Since the internal communication protocol is as follows, please refer to when checking XPort communication setting. The RS - 232C protocol is as follows:...

  • Page 13: Name And Function Of Each Part

    TW-800R-EXL ■Name and function of each part ●Receiver TW-800R-EXL Main body Extension unit This label is added For FCC/IC. 1.Power switch For power ON and OFF 2.Terminal block of Terminal block for power source of DC24V(M3) power source 3.DIP switch 1 DIP switch for setting (6 selection) 4.DIP switch 2...

  • Page 14: Setting

    TW-800R-EXL ■Setting It needs doing “pairing” a transmitter and a receiver before using. The number of transmitters which can register pairing to one set of a receiver does not have restriction. ID number of receiver is memorized in transmitter. Transmitter transmits the signal included ID number of receiver.
  • Page 15 TW-800R-EXL ●Setting of receiver You can set “relay output time”, “Double count protect time”, “Behavior of buzzer” by 6-position DIP switch. Please set by your operation. DIP switch 1 (Main body side) ◆Buzzer ON/OFF DIPSW Buzzer does not sound Buzzer sounds ◆Relay output time (4 kinds)
  • Page 16 TW-800R-EXL DIP switch 2 (Extension unit side) DIP switch 2 - 1 and 2 of the extension unit set the communication speed and flow control of the internal CPU ⇔ XPort. In this receiver, since the setting between built-in CPU and XPort is done at the time of shipment, if there is no special reason, please do not change the setting.

  • Page 17: How To Use

    TW-800R-EXL ■How to use 1. Power switch of receiver is turned on. Please confirm the LED situation as turning off. When the LED for receiving turns on, the transmitter is not registered by pairing. Please make a pairing with transmitter.
  • Page 18 TW-800R-EXL ●Test switch There is a test switch for checking the battery and communication. When the transmitter transmits the signal by test switch not limit switch, receiver doesn’t output relay output. But LED of the receiver only turns on. Also, transmitter make a checking the battery at pushing the test switch. You can know the battery situation by transmitter LED and receiver LED.
  • Page 19 TW-800R-EXL ●Battery level notification function The battery level notification function notifies the battery level status in two stages. ①Notification of low battery level with test switch: It is possible to check the battery level with the test switch.When the battery is low, the red LED will light for 1 second.
  • Page 20 TW-800R-EXL ●Communication Monitor The receiver body has a monitor LED that displays the communication status between the internal CPU and the XPort, and displays the following depending on the communication status. Explanation TXD(Green) The green LED lights up while sending data.

  • Page 21: Note On Use

    TW-800R-EXL ■Note on use ■Caution for communication ・If the transmitters transmit at the same time without any difference of 1 msec, one receiver can receive up to four transmitters. ・The receiver has a buffer that temporarily holds the data sent from the transmitter. The buffer can hold up to 5 data.

  • Page 22: Dimensional Drawing

    TW-800R-EXL ■Dimensional drawing ●Receiver TW-800R-EXL...

  • Page 23: After Service And Warranty

    TW-800R-EXL ■After service and Warranty If something is wrong. If you should find anything wrong with the machine when using it under normal conditions, check the following items and contact the outlet store through which you purchased the product or our Sales Office.
  • Page 24 TW-800R-EXL Consumables and limited-life items include, but not limited to: (1) Switches (limit switches, pushbutton switches, or the like) (2) Battery cells or batteries (dry batteries, button batteries, or the like) (3) Other items subject to consumption or limitation of life caused by use.
  • Page 28 HERUTU ELECTRONICS CORPORATION 62-1 Toyooka-cho, Kita-ku, Hamamatsu, Shizuoka, 433-8103 Japan (Sales dept) TEL.+81-053-438-3555 FAX. +81-53-438-3411 Website URL https://www.herutu.co.jp/en/ E-mail info@herutu.co.jp...

Table of Contents