Table of Contents
Advertisement
Quick Links
TW-800R-EXP
Please use this operation manual correctly on reading
well. Please keep it carefully to be able to read
immediately, when required.
Contents
■General outline ..........................................................1
■Main part and accessories ........................................1
■Safety concerns ........................................................3
■Name and function of each part ...............................4
■Installation .................................................................5
■Setting .......................................................................6
■How to use ................................................................7
■Specification ..............................................................9
■Dimensional drawing ..............................................10
■After service and Warranty ..................................... 11
Wireless Communication
Manual V1.20
Advertisement
Table of Contents
Related Manuals for Herutu TW-800R-EXP
Summary of Contents for Herutu TW-800R-EXP
-
Page 1: Table Of Contents
Wireless Communication TW-800R-EXP Manual V1.20 Please use this operation manual correctly on reading well. Please keep it carefully to be able to read immediately, when required. Contents ■General outline ............1 ■Main part and accessories ........1 ■Safety concerns ............3 ■Name and function of each part .......4 ■Installation ..............5... -
Page 3: General Outline
TW-800-EXP ■General outline [TW-800R-EXP] is a product to be fixed extension unit of 3 relay output to [TW-800R]. This manual is described about only a function of extension unit. Please read [TW-800 manual] about transmitter [TW-800T] and receiver [TW-800R] and wireless specification. - Page 4 TW-800-EXP Option ・AC Adapter ADB24050-C (With connecting cable 1.8m) Cable approx. 1.5m Cable approx. 1.8m ・External antenna MB-13F (With magnet base/Coaxial cable approx. 1.5m) Antenna approx. 22.5cm Coaxial cable approx. 1.5m *ANT2 is fixed by resin before shipment by regulation of FCC/IC in an applicable country.
-
Page 5: Safety Concerns
TW-800-EXP ■Safety concerns Safety concerns (Be sure to read) To prevent human injury of user or damage in property from occurring, be sure to observe the precautions shown below. ■ The degree in safety hazard and damage generated by the wrong usage while ignoring the descriptions is classified by the following displays. -
Page 6: Name And Function Of Each Part
TW-800-EXP ■Name and function of each part ●Receiver TW-800R-EXP This label is added Main body Extension unit For FCC/IC. 1.Power switch For power ON and OFF 2.Terminal block of power source Terminal block for power source of DC24V(M3) 3.DIP switch For setting DIP switch (6 selection) 4.Output terminal block for... -
Page 7: Installation
TW-800-EXP ■Installation Make a wiring for the output terminal block of OUT2/OUT3/OUT4. Output turns on with relay contact. Once output turns on, short-circuited condition is made between terminals. Once the rated contact load is exceeded, inner circuit might be damaged. Use an extreme care. Rated load voltage AC/DC30V per point Rated load current 0.5A per point Contact mechanism MOS-FET/1a... -
Page 8: Setting
TW-800-EXP ■Setting It needs “pairing” a transmitter and a receiver before using for OUT2-OUT4. Transmitter and receiver communicate by recognizing the other party's recognition signal by pairing. ●Pairing for OUT2-OUT4 (Registration) Power Switch is turned on pushing the lighting switch of output (OUT2-OUT4) that you want to register of the receiver. -
Page 9: How To Use
TW-800-EXP ■How to use 1. Power switch of receiver is turned on. Please confirm the LED situation as turning off. The LEDs for OUT1, OUT2, OUT3 and OUT4 turn off if they are paired with the transmitter, and they turn on if they are not paired with the transmitter. - Page 10 TW-800-EXP ●Test switch There is a test switch for checking the battery and communication. When the transmitter transmits the signal by test switch not limit switch, receiver doesn’t output relay output. But LED of receiver only turns on. Also transmitter make a checking the battery at pushing the test switch. You can know the battery situation by transmitter LED and Receiver LED.
-
Page 11: Specification
2,403MHz-2,476MHz Channel 76CH Modulation way GFSK Communication way Simplex Power of antenna 2.1mW ●Receiver TW-800R-EXP Items Specification Contact output * 4point (Terminal block:M3(2P)) Contact mechanism MOS-FET/1a Output Rated load voltage AC/DC30V per point Rated load current 0.5A per point Buzzer... -
Page 12: Dimensional Drawing
TW-800-EXP ■Dimensional drawing ●Receiver TW-800R-EXP... -
Page 13: After Service And Warranty
TW-800-EXP ■After service and Warranty If something is wrong. If you should find anything wrong with the machine when using it under normal conditions, check the following items and contact the outlet store through which you purchased the product or our Sales Office. - Page 14 TW-800-EXP Consumables and limited-life items include, but not limited to: (1) Switches (limit switches, pushbutton switches, or the like) (2) Battery cells or batteries (dry batteries, button batteries, or the like) (3) Other items subject to consumption or limitation of life caused by use. 8.
- Page 16 HERUTU ELECTRONICS CORPORATION 62-1 Toyooka-cho, Kita-ku, Hamamatsu, Shizuoka, 433-8103 Japan (Sales dept) TEL.+81-053-438-3555 FAX. +81-53-438-3411 Website URL https://www.herutu.co.jp/en/ E-mail info@herutu.co.jp...
Need help?
Do you have a question about the TW-800R-EXP and is the answer not in the manual?
Questions and answers