golmar V2PLUS Instruction Manual page 99

98
F
ix the monitor connection block to the wall
Avoid placing the monitor near sources of heat, in dusty
locations or smoky environments
To install the monitor directly over the wall, drill two holes of
Ø6mm. and use the supplied screws
The upper part of the monitor connection block must be
placed at 1,60m. height roughly The minimum
distance between the monitor connection block and
the closest object must be
F
ix the monitor .
MONITOR INSTALLATION
.
.
.
.
5cm.
Place the monitor at right angles to the
connection block and align the attaching
holes of the monitor with the attachment
hooks of the connection block, as it is shown
on the drawing.
Lock out the monitor. Press the right side till the
attachment clip locks the monitor firmly
To disassemble the monitor from the connector,
use a plain screwdriver to release the
attachment clip Remove the monitor from
the connection block, taking special care
that it does not fall
.
.
.