Description Of Display Unit; Layout Of Display Unit - Fujitsu ASU30RLE Service Instruction

1-33. DESCRIPTION OF DISPLAY UNIT

1-33-1 Layout of Display Unit

Various settings can be adjusted by changing Push switches on the board of the outdoor unit.
•
( Excerpt from the "INSTALATION MANUAL" )
Display lamp
(1) POWER / MODE
(2) ERROR
(3) PUMP DOWN
(L1)
(4) LOW NOISE MODE
(L2, L3)
(5) PEAK CUT
(L4, L5, L6)
Switch
MODE
SELECT
ENTER
EXIT / INITIALIZE
PUMP DOWN
Inverter cover
Function or operation method
Lights on while power on. Local setting in outdoor unit or
Green
error code is displayed with blink.
Red Blinks during abnormal air-conditioner operation.
Orange Lights on during pump down operation.
Lights on during "Low noise" mode when local setting is activated.
Orange
(Lighting pattern of L2 and L3 indicates low noise level)
Lights on during "Peak cut" mode when local setting is activated.
Orange
(Lighting pattern of L4, L5 and L6 indicates peak cut level)
Function or operation method
SW1 To switch between "Local setting" and "Error code display".
To switch between the individual "Local settings" and the
SW2
"Error code displays".
SW3 To fix the individual "Local settings " and the "Error code displays".
SW4 To return to "Operation status display".
SW5 To start the pump down operation.
01-27
LED DISPLAY
(1) (2) (3) (4)
SW1 SW2 SW3
PUSH SWITCH
(5)
SW4 SW5