Replacing The Adf Roller - Raven Original 2nd Generation User Manual

Replacing the ADF Roller

After scanning approximately 200,000 pages through the ADF, the ADF rollers may be
worn out and you may experience problems with document feeding. In this case, you
may need to replace a new ADF roller. For ordering the ADF roller, please email Raven
support at support@raven.com or call 1-800-713-9009 to order a replacement.
Disassembling Procedure
1. Press the ADF Release button to open the ADF front door.
2. Push up on the cover to prop into a workable position.
3. Pull the right side of the ADF roller towards you
4. The roller will detach and pull out of its setting.
Reassembling Procedure
1. Insert the left end of the ADF roller first to its slot and place the ADF roller to its
proper position.
2. One in place, push the ADF cover back into place.
3. Close the ADF to complete installation.
30
support@raven.com | 1-800-713-9009 | raven.com/support