Page 1
The following cautions MUST be observed to avoid serious injury. 1) Do not attempt to adjust your Elite arm until everything you intend to mount to the arm is mounted. 2) Arm must be completely horizontal (extended) before adjusting the arms tension.
Page 2
Remove the ceiling mount from the box, and find the 4 #14 wood screws in your hardware bag. Firmly secure the ceiling mount to a solid stud in the ceiling using all 4 of the provided screws and being sure the mount is level.
Page 3
Remove the long arm cover by unscrewing the 2 6-32 flathead screws using a philips head screwdriver. Remove the end covers by unscrewing the 2 10-24 flathead screws using the 1/8” hex key. Run the cords along the arm all the way through the cord channel up into the ceiling mount.
Page 4
Adjustment port. Use the buttons to adjust the tilt of your monitor. Lift gently on the monitor to free buttons from the monitors weight. Thank you for your purchase of an ICW Titan Elite arm. Any questions please call 1-800-558-4435...
Need help?
Do you have a question about the Elite and is the answer not in the manual?
Questions and answers