Supermicro SuperServer 1028GR-TR User Manual page 90

SuperServer 1028GR-TR/TRT User's Manual
CPU Configuration

This submenu displays the following CPU information as detected by the BIOS. It
also allows the user to configure CPU settings.
•
Processor Socket
•
Processor ID
•
Processor Frequency
•
Processor Max Ratio
•
Processor Min Ratio
•
Microcode Revision
•
L1 Cache RAM
•
L2 Cache RAM
•
L3 Cache RAM
•
Processor 0 Version
•
Processor 1 Version
Clock Spread Spectrum
Select Enable to allow the BIOS to monitor and attempt to reduce the level of
Electromagnetic Interference caused by the components whenever needed. The
options are Disable and Enable.
Hyper-Threading (All)
Select Enable to support Intel's Hyper-threading Technology to enhance CPU per-
formance. The options are Enable and Disable.
Cores Enabled
This feature allows the user to set the number of CPU cores to enable. Enter "0"
to enable all cores. The default setting is 0.
Execute-Disable Bit (Available if supported by the OS & the CPU)
Select Enable for Execute Disable Bit Technology support, which will allow the
processor to designate areas in the system memory where an application code can
execute and where it cannot, thus preventing a worm or a virus from flooding illegal
7-6