Supermicro SuperServer 1028GR-TR User Manual page 58

SUPERSERVER 1028GR-TR/TRT User's Manual
SW1
(BP) USB 4/5 (3.0)
(FP) 2/3 (3.0)
(FP) USB 0/1 (2.0)
VGA
LED Description
LE4 Rear UID LED
LE2 Onboard PWR LED
LEDM1 BMC Heartbeat LED
Notes:
•
For JPCIE1-1/JPCIE1-3 PCI slots to work properly, use proprietary riser cards
(eg. RSC-R1UG-E16AR+II) in the slots.
•
PCI Slot 1, Slot 2 and Slot 5 are controlled by CPU1 and are only available
when a processor is installed in CPU Socket 1. PCI Slot 3, Slot 4 and Slot 6
are controlled by CPU2 and are available only when a processor is installed
in CPU Socket 2.
•
To provide adequate power supply to the system, be sure to connect all onboard
power connectors to the power supply.
Caution: To avoid damaging the power supply or the serverboard, be sure to
connect the power supply to the SMCI-proprietary power connector (JPW1), and
six 8-pin power connectors (JPW2, JPW3-7) on the serverboard. Failure in doing
so may void the manufacturer warranty on your power supply and serverboard.
UID Switch
Backpanel USB 3.0 Port 4/Port 5
Front Accessible USB 3.0 headers 0/1, 2/3
Front-Accessible USB 2.0 header for two USB connections
USB 0/1
Backpanel VGA port
X10DRG-H(T) LED Indicators
State
Blue: On
On
Green: Blinking
5-12
Status
Unit Identified
System Power On
BMC Normal