Related Manuals for Clarke CIG1432
Summary of Contents for Clarke CIG1432
- Page 1 X-LARGE GARAGE/WORKSHOP MODEL NO: CIG1432 PART NO: 3503594 ASSEMBLY INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0921...
-
Page 2: Specifications
INTRODUCTION Thank you for purchasing this CLARKE X Large Garage/Workshop. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: General Safety Warnings
GENERAL SAFETY WARNINGS WARNING: READ THESE SAFETY INSTRUCTIONS TO REDUCE THE RISK OF INJURY. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. DO NOT use this product in environments for which it is not Intended (i.e. extreme cold, high winds, extreme heat, heavy rainfall, etc). DO NOT use open flames or cooking or heating devices inside or in close proximity to the garage including all types of stoves, gas heaters, gas lanterns, electric heaters, torches, fly killers, etc. -
Page 4: Care Of The Garage Structure
A supply of fresh air through the doorway will at least partly remove this issue. For long term storage of moisture sensitive belongings in all weathers, the use of a Dehumidifier may be required, such as those in the CLARKE range. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... - Page 5 A suitable extension lead to a locally available power supply will be required. Condensation will be much less of an issue during the summer months. If storing a vehicle in your garage over the winter months we recommend the use of a secondary lightweight cover over your vehicle. COMPONENT PARTS INVENTORY Parts &...
- Page 6 ASSEMBLY WARNING: DO NOT PLACE THE PRODUCT UNDER TREES FROM WHICH HARD FRUIT SUCH AS APPLES, WALNUTS OR HEAVY PINE CONES, ETC., MAY FALL. KEEP CHILDREN AWAY DURING ASSEMBLY. DO NOT ATTEMPT TO ASSEMBLE THE PRODUCT IF ANY PARTS ARE MISSING. DO NOT LEAVE THE GARAGE UNATTENDED DURING ASSEMBLY IN CASE PERSONAL INJURY OR DAMAGE MAY OCCUR Have an overview of all parts before attempting construction and make sure...
- Page 7 2. Connect the Brace (9) & Swaged Brace (8) together. Attach a Brace (9) and Front Purlin (6) to the first Straight Tube (4) at the Base Plate (5a/b), using long bolt (11) and nut (12). 3. Insert the tapered end of a Swaged Purlin (7) into the end of the Front Purlin (6) and secure using a long bolt (11) and nut (12).
- Page 8 • With the help of two other people, lift the completed arch and insert it into the Straight Vertical Tube (4) on each side. Do the same with the other two arches. • Using a ladder to reach the arch, attach Front Purlin (6), then Purlin (7) under the arches using long bolts (11) and nuts (12).
- Page 9 PROTECTIVE STRIPS In order to protect the fabric cover at points of wear, some adhesive tape is provided. This should be adhered to the frame at the positions shown after peeling off the adhesive backing strip. 1. Cut the backing strip into suitable lengths of approximately 9”...
- Page 10 7. With the help of two others, carefully pull the Roof Cover over the frame. Keep the cover centered on the frame while pulling it over. It may help to have others guide the feeding of the cover from where it is lying. CAUTION: DO NOT TEAR THE ROOF COVER.
-
Page 11: Maintenance
and re-set the ratchet to allow for more strap material becoming wound around the ratchet spindle. WARNING: IF POSITIONING THE GARAGE IN A WINDY LOCATION ALWAYS ENSURE THE FRONT DOOR IS KEPT FULLY CLOSED TO PREVENT WIND LIFTING IT FROM INSIDE. WARNING: SERIOUS INJURY TO PERSONS OR PROPERTY COULD RESULT IF THE GARAGE IS NOT SECURELY ANCHORED.