Table of Contents
Advertisement
Quick Links
Instant Garage 16' x 12' 3" x 8' 6"
Assembly Instructions
C
Door
Height
1.8M
A
B
DESCRIPTION
MODEL #
A
B
C
CIG 1216
Instant Garage 4.9 x 3.7 x 2.6 M - Grey
3503500
16' x 12' 3" x 8' 6"
RECOMMENDED TOOLS
OR
Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored.
Before you start: 2 or more individuals recommended for assembly, approximate time 2 hours.
PARTS & SERVICE: 0208 988 7400
E-mail: Parts@clarkeinternational.com or
Clarke International
Service@clarkeinternational.com
Hemnall Street
Epping
Essex CM16 4LG
SALES: UK 01992 565333 or
ENGLAND
EXPORT: 00 44 (0)1992 565335
www.clarkeinternational.com
3/30/12
Page 1
05_62699_0A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Clarke 3503500
Summary of Contents for Clarke 3503500
- Page 1 DESCRIPTION MODEL # CIG 1216 Instant Garage 4.9 x 3.7 x 2.6 M - Grey 3503500 16' x 12' 3" x 8' 6" RECOMMENDED TOOLS Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored. Before you start: 2 or more individuals recommended for assembly, approximate time 2 hours.
- Page 2 International is not responsible for damage to the unit or the contents from acts of nature. Any garage that is not anchored ® securely has the potential to fly away causing damage. Periodically check the anchors to ensure stability of the garage. Clarke ®...
- Page 3 Instant Garage 16' x 12'3" x 8'6" - Parts List - Model # CIG 1216 3503500 Description of Parts: Quantity Part # 45 3 Top Cross Rail 8 in. / 115,3 cm 801258 49 3 4 in. / 126,4 cm...
- Page 4 1. AsseMble 2 enD ribs note: the bolt heads at Secure connections using Bolts as shown with #01010 Nuts. the end ribs must be facing outward to avoid damaging your cover. 801256 802130 802130 801209 801209 #03032 Bolts (1 ") 802694 802694 #10115 Bolts (1...
- Page 5 3. connect Front enD rib to A MiDDle rib A. Connect 2 Side Cross Rails (802129) at front end rib with Shelter Stabiliser (800938) as shown. B. Connect Side Cross Rails at middle rib with Shelter Stabiliser as shown. Leave open for next rib connection. C.
- Page 6 4. connect reMAininG ribs A. Use #802130 Side Cross Rails and Shelter Stabiliser (800938) to connect middle ribs as shown. B. Use #802129 Side Cross Rails and Shelter Stabiliser to connect rear end rib. C. Use Top Cross Rail (801258) to connect ribs at the top. 03032 03032 10114...
- Page 7 5. sqUArinG Up tHe FrAMe A. Place frame in its final location, which needs to be as flat and level as possible. B. Measure across opposite corners. These distances must be equal to within 1 inch. C. Check that the front and rear of the frame measures 12 feet in width 12 ft.
- Page 8 7. Door pAnel AnD bAcK pAnel instAllAtion A. (1) Hold end panel at the top center with white inner surface facing inside of the shelter. (2) Wrap the edges of the fabric panel around the end rib and line up the cross rails with the pre made slits in the fabric. B.
- Page 9 7. enD pAnel instAllAtion - continued D. At the bottom, where the webbing exits the pocket on each side of end panel, pull webbing as you would a drawstring to remove the slack. Be careful not to pull the webbing strap out of the webbing pocket. END PANEL VIEW FRoM INSIDE GARAGE...
- Page 10 D. Disassemble cover rails and slide through fabric pockets at each leg and reattach with clamps to each leg. Repeat this on other side. Push down on cover rails to tighten cover, before tightening bolts completely. E. Check and tighten Ratchets and Cover Rails monthly to ensure the cover is tight. NOTE: The Clarke logo should ®...
Need help?
Do you have a question about the 3503500 and is the answer not in the manual?
Questions and answers