Matrix Visionpro Quick Start Manual page 16

Trunk Landing Destination for Night Mode
To assign the Trunk Landing Destination for Night Mode,
• Dial 48-Trunk-Ext1-Ext2-Ext3-Ext4
To assign the Trunk Landing Destination for Night Mode for all trunks at once,
• Dial 48-*-Ext1-Ext2-Ext3-Ext4
Where,
Trunk is from 0 to 2.
Ext1 to Ext4 are the flexible numbers of destination stations. Flexible number can be of 1,2,3
or 4 digits. Maximum four destinations can be programmed for a single trunk.
Hunt Timer
Hunt Timer is defined as the time for which a station rings when a trunk call lands on that station.
It is similar to the 'Ring Timer'. On expiry of the Hunt Timer, the next station of the Station Group
assigned to the trunk will start ringing.
To configure the Hunt Timer,
• Dial 212-Timer
Where,
Timer is from 01-99 seconds.
Hunting Scheme
To configure the Day and Night Hunting scheme for a trunk,
• Dial 46-Trunk-Day Hunting Scheme-Night Hunting Scheme
To configure for all trunks at once,
• Dial 46-*-Day Hunting Scheme-Night Hunting Scheme
Where,
Trunk is from 0 to 2.
Hunting Scheme is,
0 for Hunting Off
1 for Round Robin
2 for Delayed Simultaneous
3 for Immediate Simultaneous
To exit the Phone Wizard programming mode,
• Dial 0.
You can exit the programming mode by dialing this command at any time.
Matrix VISIONPRO Quick Start 13