Safety Stop; Reset Function - Beretta MYNUTE X R Installer And User Manual

8.5

Safety stop

If there are ignition faults or boiler operation malfunctions, carry out a "SAFETY STOP". On
the display, in addition to the fault code, the icon
frequency of 0.5sec ON and 0.5sec OFF.
The backlight blinks for 1min after which it switches off, while the icon
On the 4 digits a message scrolls containing the error code and its description .
8.6

Reset function

The "RESET" icon comes on when there is an alarm that requires a manual reset by the user
(for example flame lockout). To reset the lockout press key 2 RESET.
If the release attempts do not restart the boiler, contact your local Technical Assistance
.
Centre
9 MALFUNCTIONING (see "4.19 Lights and
faults")
is also displayed, which blinks with a
continues blinking.
DAY
DAY
RESET
ENGLISH
27