Selecting A Source; Browsing Through Lists - T+A MP 200 User Manual

Selecting a source

• Select the desired source by pressing the corresponding source
selection button on the device repeatedly, if necessary, or press the
source selection button on the remote control repeatedly until the
source is shown in the display.
• When operating the MP 200 without a DAC 200 or HA 200, the source
can alternatively be selected via the
control (press repeatedly if necessary).
j
If the MP 200 is operated in a system network with a DAC 200 or an HA 200, the source selection buttons
... of the remote control are used for the source selection of the DAC 200 or HA 200 sources. In this case,
source selection at the MP 200 via remote control is done exclusively via source selection rocker.
For a faster and more convenient source selection, not required sources can be deactivated in the system
settings. See chapter System settings.

Browsing through lists

• A folder/title/station/favorite can be selected by turning the SELECT knob on the front panel. The selec-
ted list entry is displayed in enlarged form.
• The selected list entry can be opened or played by pressing the SELECT knob depending on the type
(folder/title/station etc.).
• A long press on the SELECT knob jumps back to the previous level (if available).
Source selection
buttons
... buttons on the remote
Source selection
rocker
15