Upnp, Music Services And Usb; General Information; Source Selection; Display - T+A MP 200 User Manual

UPnP, Music services and USB

General information

The MP 200 includes a streaming client (SCL).
This enables music playback from network servers (NAS), a directly connected USB storage device or
music streaming services e.g. Tidal and Qobuz.
To make use of music services you may need to take out a paid subscription with the appropriate provider.
j
Use of music services requires the input of access data (username and password. These access data can be
stored separately for each provider in the Music services menu item within the settings menu (Page 29).
The memory medium can be formatted with any of the following file systems:
FAT16, FAT32, NTFS, ext2, ext3 or ext4.
The exact form of the list format and the preparation of the content depends mainly on the capabilities of the
server / music streaming service.

Source selection

Press the SCL button on the front panel of the MP 200 or the
mote control repeatedly if necessary until the desired source is shown in the display.

Display

Playback of directories

In addition to the facility to play back individual folder content, it is
also possible to play back entire directories. This is accomplished
by selecting the folder of the directory to be played, then pressing
the button to start playback. Playback commences with the
first entry in the list of content to be played. If an entry in the list
should contain a folder with additional sub-folders, the content
of the lowest folder is always played first. This is followed by the
content of the next higher folder level, etc. (see diagram right).
Only possible with UPnP and USB.
j
44
button on the FM 200 re-