Table of Contents
Advertisement
Page
| 55
Lead-in
This option places a leading waypoint out for all flight line runs.
Start From
This sets the location from where the flight lines will start. There are six options; Home, Top
Left, Bottom Left, Top Right, Bottom Right, and Point. The default is home and is the
recommended option.
Overlap [%]
This sets the camera triggering based on the camera configuration.
Side lap [%]
This sets the flight line spacing based on the camera configuration.
Cross Grid
This check box adds perpendicular flights lines to create a grid pattern.
Camera Config Tab
It is not recommended to amend values on this tab. This tab should be referenced to verify
the GSD (Ground Sampling Distance) of the chosen payload and ensure the side lap %
chosen will be sufficient for the data acquisition plan.
Accepting a Survey Grid
Pressing the 'Accept' button on the Simple Tab will close the 'Survey (Grid)' sub-window and transfer
the flight lines to the main map region.
Saving and Loading a Flight
Flight plans are saved as *.waypoints or *.txt. These files are ASCII files.
Saving and Loading Flight Plan
To save or load a flight plan the software must be on the 'FLIGHT PLAN' screen. The right-
hand side of the screen contains a collapsible pane labelled 'Action'. Ensure this pane is
extended. There are two buttons labelled 'Load WP File' and 'Save WP File'. These open
standard windows load and save sub-windows. Once opened navigate through the system
to desired location and either save or load the desired file.
| Version 1.5
INNOFLIGHT INTERNATIONAL GALAXY 950 / GALAXY 1080HL MANUAL
Advertisement
Table of Contents
