Table of Contents
Advertisement
Page
| 42
Flight Planning
The Galaxy utilizes a common protocol for flight planning and telemetry data
communications allowing multiple flight planning software's to be used. We only
recommend and support our own software 'I-GCS' however we do have a modified version
of the open source software Mission Planner and detailed instructions to use both are in
this manual.
I-GCS
I-GCS is designed to control all autonomous vehicles fitted with the Jupiter series autopilots.
Calibration of the autopilot system is not possible through this software and must be done
via separate software that connects directly to the autopilot hardware.
Installation
To install I-GCS you will need to copy or download the installer to the Windows based
computer you will be flight planning or operating the Galaxy from. Run the installer as
administrator and follow the prompts to complete the install.
General Setup
After the installation is complete it is required to change I-GCS settings to your preferences.
This is a very user-friendly process allowing easy use and customization to meet customer
preferences.
To locate "General Setup" select
the symbol at the top left of the main page. This will
display the INF logo with 3 options below, "General Setup", "Parameter Setup" and "RTK
Setup".
| Version 1.5
INNOFLIGHT INTERNATIONAL GALAXY 950 / GALAXY 1080HL MANUAL
Advertisement
Table of Contents
