Table of Contents
Advertisement
Page
| 50
Measure Tool
Located on the left vertical tool tab is the "Measure"
icon. Setting points on the map
will show the distance between two points dropped on the map.
Map Centring Tool
To reposition the maps so that the home point is centred on the screen click the "Centre"
icon.
INF Flight Planner
INF Flight Planner software is used to communicate with the autopilot to complete a flight
or project. The software is based on the open source software Mission Planner that has
been customized to work for our autopilot system.
INF Flight Planner is designed to control all autonomous vehicles fitted with the Jupiter
series autopilots. Calibration of the autopilot system is not possible through this software
and must be done via separate software that connects directly to the autopilot hardware.
Installation
The software comes pre-installed on the Ground Control Station (GCS). You may receive an
additional copy of the software which may be installed on local machines (Windows based
environment) for the of purpose flight planning.
Files
The install comes as a single file that is a compressed self-extracting zip file or as a folder
that only needs copying to the users desired hard drive location.
Permissions
The install needs no special permissions to run other than access to the internet.
Version Updates
Instructions will be provided with any update to guide the user through the update process.
Opening the software is done by double clicking the 'INF Flight Planner' shortcut icon on the
GCS desktop, or by navigating to the user installation location and double clicking the
| Version 1.5
INNOFLIGHT INTERNATIONAL GALAXY 950 / GALAXY 1080HL MANUAL
Advertisement
Table of Contents
