Adding Telemetry Additional Data; Connection To Galaxy; Flight Planning - Innoflight GALAXY 950 Operating Manual

Page | 45

Adding Telemetry Additional Data

To add additional telemetry data, click "Add Info" this will pop up a window with more
telemetry options to select. You can add up to 14 total data options. To add additional flight
information, select the value and click "OK" at the bottom of the page, this will save the
value to the main page of I-GCS.

Connection to Galaxy

To connect the Galaxy to I-GCS you will need to first have the Ground Control Station paired
to the windows computer being used. For information on this process go to page .11 of this
manual. Located at the top right of the screen is "connection" click this to bring up the
window to allow connection, select the correct com port to initiate the connection. Once
connected the telemetry values will change to reflect the Galaxy data being transmitted.

Flight Planning

Planning mission with I-GCS allows simple to complicated missions to be planned with ease.
On the right side of I-GCS, the tools required to plan missions are set out vertically. To begin
planning a mission select the "Create" Icon , this will enter the mission planning
screen.
| Version 1.5
INNOFLIGHT INTERNATIONAL GALAXY 950 / GALAXY 1080HL MANUAL