Page
| 18
Main Blades
The main blades are attached with two M6 bolts, the blade tension needs to be set so that
the blades can fold when pushed back but not so loose that they have lag and cause
vibrations.
Testing Blade Tension
To test the blade tension, straighten the main blades out and tilt the Galaxy on its side, the
main blades should stay level. If you jolt the Galaxy slightly the blades should just start to
droop. If you turn the galaxy on its side and the blades fall instantly, they are too loose.
| Version 1.5
INNOFLIGHT INTERNATIONAL GALAXY 950 / GALAXY 1080HL MANUAL