Table of Contents
Advertisement
Page
| 49
Completing flight planning
Once the grid settings have been established, click the confirmation tick
to set the grid
path. It is now possible to save the waypoints or write the way points to the Galaxy
autopilot. It is recommended to save the waypoints at this time to avoid losing any flight
planning work completed. With I-GCS connected to the Galaxy it is possible to write the
waypoints to the autopilot. Click the "Create"
icon again to close the flight planning
page and return to the home page.
Additional I-GCS information
Loading Pre-existing Missions
It possible to load pre planned flights using the "Load waypoints" option. This will open a
windows folder browser, navigate to the selected .waypoints file, selected the file. The pre-
planned mission will load and be able to be written to the Galaxy. The same process can be
followed with opening pre-planned area files. Select the "Load Area" option. This will open a
windows folder browser, navigate to the .poly file, select the file. The pre-planned polygon
will populate.
Read Waypoints
Read waypoints allows the waypoints stored on the Galaxy to be read back to the flight
planner. The waypoints can only be read if the Galaxy power has not be cycled, the Galaxy
will only store the last written waypoint file. When re powered the waypoint file is cleared
from the autopilot.
| Version 1.5
INNOFLIGHT INTERNATIONAL GALAXY 950 / GALAXY 1080HL MANUAL
Advertisement
Table of Contents
