Table of Contents
Advertisement
● Camera facing forward: This assumes the camera is off set from nadir.
● Flying Speed (est) (m/s): Set the aircraft speed for the aircraft.
● Add Take-off and Land WP's: This automatically adds the take-off and landing
waypoints at the home location.
● Use RTL: Turns on automatic return-to-land.
● Split into x segments: Splits the project into several sub segments.
Used!
Display
Selectable options for isplay in the map region of the Survey Grid sub window.
Boundary
The polygon in which flight lines are drawn.
Markers
Displays Waypoint markers for flight line start and end.
Grid
Displays the flight line.
Internal
Displays approximate camera triggering locations.
Footprints
Displays approximate area of coverage for each camera capture.
Advance Options
Turns on additional options tabs of 'Grid Options' and 'Camera Configuration'.
Grid Options Tab
The 'Grid Options' tab allows for the run spacing and camera overlap for imagery capture.
Distance between lines [m]:
This sets the run spacing between flight lines. This must be entered manually. Using the
incremental will result in spacing defined by the side lap percentage being applied.
Overshoot [m]
The distance past the natural end of a flight line where an extra waypoint is placed to
extend the flight line. There are two input boxes for this option. Each one is applied to only
one end of the flight line.
INNOFLIGHT INTERNATIONAL GALAXY 950 / GALAXY 1080HL MANUAL
Page
| 54
Not Currently
| Version 1.5
Advertisement
Table of Contents
