Parent Unit Power Supply - Motorola MBP855CONNECT User Manual

2.2

Parent Unit Power Supply

1. Connect the micro USB plug of the power adapter to the Parent Unit and
2. Press and hold the 0 POWER ON/OFF button for 3 seconds to switch ON
3. Once the Baby and Parent Units are switched on, the display on the Parent
4. If there is no connection or you are out of range, the video display will go
IMPORTANT
The Parent Unit is assembled with a built-in rechargeable battery pack (Lithium
5. Press and hold the 0 POWER ON/OFF button, until the progress bar
ion battery 1880mAh, to give up to 5 hours monitor operation), please charge it
for 16 hours before initial use. The battery is not a user-accessible item. Please
contact the helpline if you think it needs replacing.
the other end to a suitable mains power socket. Only use the enclosed
power adapter (5V DC / 1500mA) with the micro USB plug.
the Parent Unit.
Unit will show the colour video captured by the Baby Unit, but if the baby's
room is dark, the video will display in black and white, with a
showing, due to the infra-red illumination by the Baby Unit.
off, a symbol will appear on the screen, and the Parent Unit will beeps
continually. Move the Parent Unit closer to the Baby Unit until the link is re-
established.
finishes scrolling, to turn OFF the Parent Unit.
NOTE
The battery icon
parent unit will beep every 15 seconds. The battery needs to be recharged; it
will take16 hours to charge fully.
12
turns RED to indicate that the battery is low, and the
icon
Getting Started