Detecto MedVue MV1 Owner's Manual page 51

Medical weight analyzer
Table of Contents

Advertisement

SERIAL AND USB DEVICE PORT COMMANDS, CONT.
Journal Mode Print Command
The host device (computer) sends:
<LF> J <CR>
This command is equivalent to pressing the PRINT key on the MedVue weight analyzer
keypad. The MedVue weight analyzer will respond by printing a ticket using the serial port (or
transmit data using the USB Device port). The ticket will be printed (or data transmitted) in the
following format:
ID: xxxxxxxxxxxxxx, DATE: date, TIME: time, WEIGHT: displayed weight,
units, HEIGHT: ht, BMI: bmi <CR><LF>
This command is equivalent to pressing the PRINT key on the MedVue weight analyzer
keypad with the PRINTER TYPE set for Print Journal Line (PRINTER TYPE =1) parameter
selected.
NOTE: If the ENAbLE Id (ID number) or bOdY MASS IdX (BMI Calculation) features are
disabled, the field will be left out on any three formats.
Data Queue Commands
The MedVue weight analyzer has been equipped with storage for weight records. When taking
a weight record, once the PRINT key is pressed, the weight, ID (if enabled and entered), date
and time are stored in the indicator. The indicator can store up to 200 weight records. Once the
limit is reached, the oldest record will be over written to make room for the new weight record.
Delete Data Queue Command
The host device (computer) sends:
<LF> XD <CR>
The MedVue weight analyzer will Delete the Data Queue.
Recall Data Queue Command
The host device (computer) sends:
<LF> XS <CR>
The MedVue weight analyzer will Recall the Data Queue. The ticket will be printed (or data
transmitted) in the following format:
ID, Date, Time, Weight, Units, Mode<cr><lf>
Where:
ID =
xxxxxxxxxxx
Date =
mm/dd/yy
Time =
hh:mm
Weight =
xxxxxx.x
Units =
uu
m =
Mode
cr =
Carriage Return
lf =
Line Feed
NOTE: Recalling the data queue does not delete the current data. The separate delete
command must be sent to clear the queue.
Up to 11-digit ID number
Month, Day, Year
Hours and Minutes
Six digits with decimal point
None, lb, kg, oz, g, st
G = Gross
(hex 0D)
(hex 0A)
8555-M512-O1 Rev E MedVue MV1 Owner's
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents