Basic Operation With Id - Detecto MedVue MV1 Owner's Manual

Basic Operation with ID

To Weigh
1. Press the ON/OFF key to turn the MV1 on.
2. If required, press the ZERO key to zero weight display.
3. Press the ID/HEIGHT key.
4. Display will change to show
5. Using numeric keys, enter up to a 14-digit alphanumeric identification number.
6. Press the ENTER key.
7. Assist patient onto scale.
8. When weight is stable (STABLE
9. If a printer is connected to scale, press the PRINT key to print a ticket.
10. Assist patient off scale.
Push Button Tare (Tare weight is NOT known)
NOTE: Tare entry is not allowed if Auto Hold is enabled.
1. In Gross Weight mode (GROSS annunciator on), place item (wheelchair, walker, etc.) on
the scale.
2. Press the TARE key.
3. Display will show weight of item on scale and the TARE annunciator will turn on.
4. Press the ENTER key.
5. Display will change to zero and NET annunciator will turn on to show that net weight
is being displayed. The item's weight has been entered as "tare weight".
6. Press the ID/HEIGHT key.
7. Display will change to show
8. Using numeric keys, enter up to a 14-digit alphanumeric identification number.
9. Press the ENTER key.
10. Assist patient onto scale.
11. When weight is stable (STABLE
12. If a printer is connected to scale, press the PRINT key to print a ticket.
13. Assist patient off scale.
18
OPERATION, CONT.
.
annunciator will turn on), read weight display.
.
annunciator will turn on), read weight display.
8555-M512-O1 Rev E MedVue MV1 Owner's