Body Mass Index (Bmi) Operation; Using Mechanical Height Rod Or Entering Known Height; Body Mass Index (Bmi) Operation With Id Using Mechanical Height Rod Or Entering Known Height - Detecto MedVue MV1 Owner's Manual

Body Mass Index (BMI) Operation

Using Mechanical Height Rod or Entering Known Height

1. Press the ON/OFF key to turn the MV1 on.
2. If required, press the ZERO key to zero weight display.
3. Perform tare operation if required. Refer to Push Button Tare or Tare Weight Entry in
previous section for instructions on using tare.
4. Press the ID/HEIGHT key.
5. If Centimeters was selected for HEIGHT UNITS in setup, the display will change to show
CENTIMETERS.
a. Use numeric keys to enter up to 4 digits (# # # . #) for height in centimeters and
then press the ENTER key.
6. If Millimeters was selected for HEIGHT UNITS in setup, display will change to show
MILLIMETERS.
a. Use numeric keys to enter up to 4 digits (# # # #) for height in millimeters and then
press the ENTER key.
7. Assist patient onto scale.
8. When weight is stable (STABLE
BMI displays.
9. If a printer is connected to scale, press the PRINT key to print a ticket. Note that BMI and
height display will clear when ticket prints.
10. Assist patient off scale.
11. If a printer is not connected to scale, the BMI display will clear when the patient is
assisted off scale, and the weight returns to zero.
Body Mass Index (BMI) Operation with ID
Using Mechanical Height Rod or Entering Known Height
1. Press the ON/OFF key to turn MV1 on.
2. If required, press the ZERO key to zero weight display.
3. Press the ID/HEIGHT key.
4. Display will change to show
5. Using numeric keys, enter up to a 14-digit alphanumeric identification number.
6. Press the ENTER key.
7. If Centimeters was selected for HEIGHT UNITS in setup, the display will change to show
CENTIMETERS.
a. Use numeric keys to enter up to 4 digits (# # # . #) for height in centimeters and
then press the ENTER key.
8. If Millimeters was selected for HEIGHT UNITS in setup, display will change to show
MILLIMETERS.
a. Use numeric keys to enter up to 4 digits (# # # #) for height in millimeters and then
press the ENTER key.
9. Assist patient onto scale.
10. When weight is stable (STABLE
BMI displays.
11. If a printer is connected to scale, press the PRINT key to print a ticket. Note that BMI, ID
and height display will clear when ticket prints.
12. Assist patient off scale.
13. If a printer is not connected to scale, the BMI display will clear when the patient is
assisted off scale, and the weight returns to zero.
20
OPERATION, CONT.
annunciator will turn on), read weight, height, and
.
annunciator will turn on), read weight, height, and
8555-M512-O1 Rev E MedVue MV1 Owner's