Board Function; Layout - DAQ PCIe-DIO05 User Manual

4. Board Function

In this chapter, the primary functions of the board are described briefly. For more information, refer to
the device specification.

4.1 Layout

The board has three LEDs to indicate the operation status.
LED3 turns on when the board is ready to operate after finished operation.
LED4 turns on when the board transmits the data.
LED5 turns on when power is applied to the board and the initialization ends up.
[Figure 4-1. PCIe-DIO05 Front side]
11-
-
PCIe-DIO05 Users Manual (Rev 1.1)
http://www.daqsystem.com