Getting To Know Your Table Saw - King Canada KC-5006R Instruction Manual

1. TABLE. Provides large working surface to support workpiece.
2. BLADE GUARD WITH RIVING KNIFE & DUST CHUTE. Protects
the operator, and must always be in place and working properly for
all thru-sawing cuts. That is all cuts whereby the blade cuts
completely through the workpiece. Convenient dust collection.
3. TABLE INSERT. Is removable for removing or installing blade or
other cutting tools.
4. ALUMINUM GUIDE. An aluminum guide can be installed to the rip
fence in the horizontal position.
5. RIP FENCE. Rip fence can be easily moved or locked in place by
simply raising or lowering lock handle.
6. RIP FENCE POINTER. Shows the distance from the blade to the rip
fence through a convenient viewing window.
7. RIP FENCE & PUSH STICK STORAGE. Conveniently stores rip
fence and push stick when not in use.
8. BLADE TILT SCALE. Shows the degree at which the blade is tilted.
9. BLADE TILT POINTER. Indicates the blade angle.
10. ELEVATION WHEEL. Raises or lowers the blade. Also used to tilt
the blade 0 0 to 45 0 .
MODEL
Blade diameter
Depth of cut at 45°
Depth of cut at 90°
Table size
Diameter of arbor
Arbor speed
Motor
Voltage
Dimensions (LxWxH)
Weight

GETTING TO KNOW YOUR TABLE SAW

11. BASE. Supports table saw. For additional stability, holes are
provided in the base to bolt the saw to a workbench if stand is not
used.
12. SAFETY SWITCH.
13. RESET BUTTON (Overload protector).
14. BLADE TILT LOCK KNOB. Locks the tilt mechanism after the
blade is adjusted to desired position.
15. MITER GAUGE SCALE. Shows the degree the workpiece is being
mitered.
16. MITER GAUGE WITH ALUMINUM FACING. Can be locked in
desired position for crosscutting or mitering by tightening the lock
handle. ALWAYS SECURELY LOCK IT WHEN IN USE.
17. MITER GAUGE STORAGE.
Conveniently stores miter gauge when not in use.
18. ALUMINUM GUIDE STORAGE.
Conveniently stores aluminum guide when not in use.
19. DUST CHUTE.
Convenient dust collection.
KC-5006R
10"
2 1/2"
3"
26" x 21-1/2"
5/8"
4,800 RPM
15 Amp.
120V, 1 phase, 60 Hz
26" x 28-1/2" x 41-3/8"
48 lbs