Advertisement
GETTING TO KNOW YOUR TOOL
Unpacking your Circular Saw
Your cordless Circular Saw requires minimal assembly before use, remove all contents
from the box. Inspect the tool carefully to make sure no breakage or damage has occurred
during transport. If any parts are missing, do not attempt to use the tool until you have
obtained the missing parts from your King Canada retailer.
Contents:
1- Cordless Circular Saw
1- 6-1/2" Blade
1- Edge guide
1- Hex. key
1. Safety start button
6. Pivot shoe
2. On/Off Trigger
7. Blade cap screw
3. Battery compartment
8. Lower blade guard
4. Upper blade guard
9. Edge guide
5. Lower blade guard lever
10. Pivot shoe angle knob
SPECIFICATIONS
Model ........................................................................................................................8050L
Voltage ................................................................................................................20V MAX
Blade diameter/Arbor diameter ........................................................................6-1/2" / 5/8"
Speed (RPM) ............................................................................................................3,650
Weight ........................................................................................................................6 lbs
Battery types (not included) ..........1.3Ah (Mod. K-020LBT) or 3.0Ah (Mod. K-023LBT-3)
Battery charger (not included) ..................................................................Mod. K-020LCG
Figure 1
11. Edge guide knob
12. Hex. key / storage
13. Pivot shoe depth knob
14. Spindle lock
OPERATION
USING YOUR 20V MAX LITHIUM-ION CORDLESS
CIRCULAR SAW
Important Note: This Cordless Circular Saw does not
come with a battery or charger, if you already own a 20V
max Li-ion cordless tool you may use its battery
(K-020LBT) and charger (K-020LCG) as they are
interchangeable. If not, it will be necessary to purchase a
battery and charger.
WARNING: Do not install battery until the accessory is
installed securely to the tool. Wear protective gloves
and safety glasses, an accessory can become extremely
hot during operation, danger of burns!
Charging the battery/battery level indicator
20V max Li-ion batteries come with a battery power level
indicator (A) Fig.2, press the button (B) to see the charge
level. If the battery level is low charge the battery. To
charge the battery (C) Fig.2, plug charger (D) power cord
into a 120V AC receptacle (do not use extension cord).
The green LED (E) will flash to indicate power to the
charger. Align the grooves the battery with those of the
charger and slide the battery all the way until it snaps into
place. The red LED (F) will light up indicating the
charging procedure has begun. Once the green LED (E)
lights up, the battery is fully charged and ready to use.
Press the battery clip (B) Fig.3 to remove battery from
charger.
Installing/removing battery from drill
To install a battery (A) Fig.3 to the base of the cordless
Circular Saw, align the grooves of the battery with those
of the base and slide the battery all the way until the
battery clip (B) snaps and holds the battery into place.
To remove the battery from the base, press the battery
clip (B) Fig.3 and slide the battery away from the base.
Turning Tool On/Off
To turn your Circular Saw ON, depress and hold the safety button (A) Fig.4, then depress
the trigger (B). Release trigger to turn your saw OFF.
Figure 2
Figure 3
Figure 4
Advertisement
