Getting To Know Your Scroll Saw - King Canada KC-163SSC-V Instruction Manual

GETTING TO KNOW YOUR SCROLL SAW

This versatile heavy-duty scroll saw is great for making toys, puzzles
and jewelry, and because of its cutting capacity, it is a handy do-it-
yourself tool. It cuts wood up to 2 inches thick as well as plastics.
1. TABLE
Provides working surface to support workpiece.
2. SAWDUST BLOWER
The sawdust blower keeps the worpiece clean for more accurate
scroll cuts. For best results, always direct the air flow at the blade
and the workpiece. To adjust, loosen the set screw in the foot
assembly, position tube and tighten screw. CAUTION: To prevent
the blower tube from collapsing- DO NOT OVERTIGHTEN.
3. BLADE STORAGE
Stores blades while they are not in use.
4. DROP FOOT
The drop foot should always be lowered until it rests on top of the
workpiece to prevent the workpiece from lifting, but not too much
that the workpiece drags.
5. DROP FOOT LOCK KNOB
Allows you to raise or lower the drop foot and lock it at the desired
height.
6
BLADE TENSION KNOB
5
DROP FOOT
LOCK KNOB
3
BLADE STORAGE
8
DEGREE SCALE
6. BLADE TENSION KNOB
Allows you to loosen or tighten the blade tension by rotating the
knob.
7. TABLE LOCK KNOB
Allows you to tilt the table and lock it at the desired angle up to 45
8. DEGREE SCALE
Shows the degree the table is tilted.
9. POWER SWITCH
Has a safety feature which is intended to prevent accidental starting.
10.VARIABLE SPEED KNOB
Allows you to increase or decrease speeds from slow to fast
(delicate work to rougher work)
11.TABLE INSERT
Should always be in place and flush with the table during a cutting
operation.
TABLE LOCK KNOB
FIGURE 1
FRONT VIEW OF THE BLADE
AND TABLE INSERT
Table insert
Table insert
positioned for
positioned for
pin type blades
plain end blades
2
SAWDUST BLOWER
4
DROP FOOT
TABLE INSERT
POWER SWITCH
10
VARIABLE SPEED KNOB
7
0 .
11
1
TABLE
9