Getting To Know Your Table Saw - King Canada KC-5007 Instruction Manual

16. MITER GAUGE
10. MITER GAUGE SCALE
3. BASE
12. MITER GAUGE STORAGE
(SIDE)
1. POWER SWITCH
5. RESET BUTTON
7. ELEVATION WHEEL
1. POWER SWITCH
2. TABLE
Provides large working surface to support workpiece.
3. BASE
Supports table saw. For additional stability, holes are provided in
the base to bolt the saw to a workbench or stand.
4. BLADE TILT LOCK HANDLE
Locks the tilt mechanism after the blade is adjusted to desired
position.
5. RESET BUTTON
6. WRENCH STORAGE
Conveniently stores wrenches when not in use.
7. ELEVATION WHEEL
Elevates or lowers the blade. Also used to tilt the blade 0
8. BLADE TILT SCALE
Shows the degree the blade is tilted.
9. RIP FENCE POINTER
Shows the distance from the blade to the rip fence through a
convenient viewing window.
10. MITER GAUGE SCALE
Shows the degree the workpiece is being mitered.

GETTING TO KNOW YOUR TABLE SAW

14. BLADE GUARD
2. TABLE
15. TABLE INSERT
FIGURE 2
11. RIP FENCE STORAGE
Conveniently stores rip fence when not in use.
12. MITER GAUGE STORAGE
Conveniently stores miter gauge when not in use.
13. RIP FENCE
Rip fence can be easily moved or locked in place by simply
raising or lowering lock-handle.
14. BLADE GUARD
Protects the operator, and must always be in place and working
properly for all thru-sawing cuts. That is all cuts whereby the
blade cuts completely through the workpiece.
15. TABLE INSERT
Is removable for removing or installing blade or other cutting
to 45 . tools.
0 0
16. MITER GAUGE
Head can be locked in desired position for crosscutting or
mitering by tightening the lock knob. ALWAYS SECURELY LOCK
IT WHEN IN USE.
13. RIP FENCE
9. RIP FENCE POINTER
11. RIP FENCE STORAGE
6. WRENCH STORAGE
4. BLADE TILT LOCK HANDLE
8. BLADE TILT SCALE