Maintenance; Cleaning; Create Account; Speed Limitation - Polaris RIDE COMMAND User Manual

MAINTENANCE

CARE AND MAINTENANCE
To clean the display shell, use a soft cloth with mild soap and water. Do not use
harsh or abrasive cleaners. For best results, use a micro-fiber towel to clean the
screen.
Certain products will damage the screen and other plastic surfaces. Do not use
alcohol to clean the display. Immediately clean off any gasoline that splashes

VEHICLE STORAGE

When preparing the vehicle for storage make sure the ignition switch is in the
OFF position to prevent battery drain and diminished battery life.

SPEED LIMITATION

Various aspects of the display such as the front and rear cameras, phone
contacts, and call logs may be unavailable while driving at high speeds.

CREATE ACCOUNT

You can create a personalized Ride Command account either by computer at
https://ridecommand.polaris.com or in the Polaris Ride Command app, which
can be downloaded to your personal device through your phone's application
store.
ON YOUR COMPUTER
Create Account
1. Open your preferred internet browser and navigate to https://ridecommand.
polaris.com.
2. From the top menu bar, click Create Account.
3. In the pop-up, type your email address and password.
4. Accept the Terms of Service agreement.
5. You should receive a confirmation email from Polaris within 24 hours of
creation.
Add Your Vehicle
6. After signing into your Ride Command account, click on Garage from the top
menu bar.
7. Press the + button to add vehicle.
NOTICE
on the display.
MAINTENANCE
39