Polaris RIDE COMMAND User Manual page 36

OPERATION
• Verify that the numbers that appear on your phone match the numbers
that appear on the display screen and accept the prompt to pair on your
phone.If your mobile phone and the display fail to pair, cycle the ignition
switch and repeat this process.
• Verify that your Bluetooth® tethering is active before proceeding.
8. Press the Log In button to login to your Ride Command account. If you do
not have a Ride Command account, sign up at ridecommand.polaris.com.
• Once you've logged in, if you wish, you can choose to upload vehicle rides
and waypoints to your Ride Command account.
After successfully logging in the first time the display will store your Ride
Command information unless manually cleared, and you will not have to log in
9. Press the X in the upper left-hand corner to close the menu.
34
NOTICE
again for future Group Rides.