Attach Accessories - Pacific Zuma Assembly And Maintenance Manual

Zuma Assembly and Maintenance Guide

14. Attach Accessories

A. At the end of the Top Beam, attach the Lat Bar to
the Main Cable using a spring clip.
Note: The two small hooks at the end of the Top
Beam can be used to store the Lat Bar when it's
not in use.
Alternatively, you can install the Tricep Straps to
the Main Cable using the spring clip, allowing
exercisers to work out a different muscle group.
B. Attach the Curl Bar to the Lower Cable using the
short piece of chain and two spring clips (installed
at each end of the chain).
You can also install the Ankle Straps to the Lower
Cable using a spring clip, allowing exercisers to
work out a different muscle group.
C. Attach the remaining spring clip to the Cable in the
middle of the Main Upright.
Step 14. Attach Accessories
Lat Bar
Curl
Bar
1 2 3
Tricep
Straps
Ankle
Strap
4 5 6
page 27