Attach The Leg Press To The Zuma - Pacific Zuma Leg Press Option Assembly Instructions Manual

Zuma Leg Press Option Assembly Instructions
1. Attach the Leg Press to the
Zuma
Important: Raise the Press Arm to get it out of the way
before you assemble the Leg Press Option. If the
optional Shroud is attached, remove it.
A. Attach the Leg Press Base to the Main Upright,
opposite the weight stack, using
two 5-inch bolts
four washers
two locknuts
Wrench tighten.
B. Rest the Support Arm against the Main Upright.
Step 1. Attach the Leg Press to the Zuma
2 - 5" bolts
A
4 - washers
2 - locknuts
1 2
Main
Upright
Leg Press Base
B
Rest the
Support Arm
against the
Main Upright.
Leg Press
Base
3 4
Main
Upright
5 6
page 7